Lazarus Experiments with TinkerForge.
Each Experiment uses TinkerForge Bricks and Bricklets plus in cases additional hardware, extentions or accessories like WiFi Extension, MakerBeam.
One Master Brick is connected via USB to a Raspberry Pi or PC. The Bricklets are connected to one or more Master Bricks.
TinkerForge Ambient Light 2.0 Logger (Lazarus)
Log the Illuminance in regular intervals.
TinkerForge Ambient Light 2.0 MQTT (Lazarus)
Subscribe to the Illuminance provided by an Ambient Light 2.0 Bricklet connected to a Raspberry Pi.
* MQTT Client Library (many thanks to the author!)
* fcl-json units to parse the JSON string from the TinkerForge MQTT Proxy (running on the Raspberry Pi)
TinkerForge IO-4 Pin Control (Lazarus)
Select a pin (0 - 3), direction set to output and change the value to high or low. Tested with LEDs.
TinkerForge IO-16 Pin Control (Lazarus)
Select a port (a or b) and pin (0 - 7). Change state to high or low. Tested with LEDs.
TinkerForge RGB LED Set Color (Lazarus)
Set the RGB color using sliders or turn on/off.
TinkerForge NFC/RFID (Lazarus)
Listen to the RFID Tags. ToDo: Act on identified tag ID, Write tag ID.
Building Blocks for professional Makers.
1 post • Page 1 of 1